Quote: the answer isn't larger, the answer would be compound. look into a higher-performance brake compound. i race miatas for fun and we do just fine with the small factory brakes, BLANK (not drilled/slotted) rotors, and a good pad/brake fluid. can do 30 minutes of continuous track time with no problem.
slotted/drilled rotors aren't needed. you're just getting rid of surface area/material that can help slow you down and dissipate heat. modern pad technology doesn't really have the same "gassing" issues as when drilled/slotted rotors were developed. if you like the look, cool. otherwise..
You don't want your brakes to build heat. Cooler brakes stop better. Brake fade happens when they get hot. If hot brakes stopped better NASCAR, INDY Formula 1 etc would not have cooling ducts running to the brakes.
ok... cooler brakes do not necessarily stop better. brake pads are designed to work between certain temperatures. exceeded either way will give poor performance. cold brakes on a nascar won't slow him down neither will ones that are entirely too hot.
i'm confused about your comment anyways. i am recommending blank rotors because they have more surface area to help rid the rotors of heat.
-------------------- So, i bought an 01 Kia Sportage. before i even drove it, i nick-named it The Goat.. it has been just like a goat.. stubbern at every corner...
This site and all original materials contained herein are Copyright 1999 - 2013 by OutdoorWire, Inc. -- All Rights Reserved.
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
This publication and OutdoorWire, Inc. assume no liability for your use of the material contained within this site.
OutdoorWire, 4x4Wire, SUVWire, JeepWire, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc.