4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

4x4Wire TrailTalk Forums Index

4x4Wire | OutdoorWire | MUIRNet News | 4x4Voice | 4x4Wire on FaceBook
Galleries | Offtopic Chat | Garage Sale | Items Wanted | Vendors | Trailrides and Events | Recreational Access and Landuse


4x4Wire Mitsubishi Trail Talk Forums

More Mitsubishi on 4x4Wire: 4x4Wire Mitsubishi Section | Mitsubishi Tech
4x4Wire TrailTalk Mitsubishi Forums: Mitsubishi 4x4 and SUV Tech | Mitsubishi Diesels | Mitsubishi Archives


Mitsubishi Forums >> Mitsubishi 4x4 & SUV Tech

fasteddy
Web Wheeler


Reged: 01/30/01
Posts: 12707
Loc: Flat Creek, GA
Re: Fuel Pump Setup for 2.6 FI Conversion
      03/04/12 10:03 PM

A really good spot it is the tubular crossmember above and behind the rear axle. The walbro is overkill, but if you are worried, put a coil spring from the hdw store inside the suction line. I used a Master E8000 from autozone on mine and it was just dandy. I attached it to the crossmember cushioned with a `piece of old innertube with plain old hose clamps. The master pump had threaded fittings, and I just adapted to ridged nipples, and used double hose clamps.

--------------------
"If you can't be a good influence, don't worry, you can still be a horrid example."

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Fuel Pump Setup for 2.6 FI Conversion jonboyb 03/04/12 01:17 PM
. * * Re: Fuel Pump Setup for 2.6 FI Conversion haztoys   03/04/12 02:25 PM
. * * Re: Fuel Pump Setup for 2.6 FI Conversion fasteddy   03/04/12 10:03 PM
. * * Re: Fuel Pump Setup for 2.6 FI Conversion Mudraider   03/04/12 10:21 PM
. * * Re: Fuel Pump Setup for 2.6 FI Conversion JohnnyBfromPeoria   03/04/12 10:23 PM
. * * Re: Fuel Pump Setup for 2.6 FI Conversion fasteddy   03/04/12 10:37 PM
. * * Re: Fuel Pump Setup for 2.6 FI Conversion JohnnyBfromPeoria   03/04/12 11:36 PM
. * * Re: Fuel Pump Setup for 2.6 FI Conversion JohnnyBfromPeoria   03/04/12 11:42 PM
. * * Re: Fuel Pump Setup for 2.6 FI Conversion fasteddy   03/05/12 07:34 AM
. * * Re: Fuel Pump Setup for 2.6 FI Conversion jonboyb   03/05/12 10:14 AM
. * * Re: Fuel Pump Setup for 2.6 FI Conversion Kevin C   03/05/12 11:57 AM
. * * Re: Fuel Pump Setup for 2.6 FI Conversion fasteddy   03/05/12 02:33 PM
. * * Re: Fuel Pump Setup for 2.6 FI Conversion jonboyb   03/06/12 09:40 AM
. * * Re: Fuel Pump Setup for 2.6 FI Conversion Kevin C   03/06/12 11:10 AM
. * * Re: Fuel Pump Setup for 2.6 FI Conversion fasteddy   03/06/12 10:56 AM
. * * Re: Fuel Pump Setup for 2.6 FI Conversion jonboyb   03/06/12 11:02 AM
. * * Re: Fuel Pump Setup for 2.6 FI Conversion fasteddy   03/06/12 11:15 AM
. * * Re: Fuel Pump Setup for 2.6 FI Conversion jonboyb   03/12/12 08:12 AM
. * * Re: Fuel Pump Setup for 2.6 FI Conversion LandRaiderModerator   03/12/12 01:14 PM

Extra information
5 registered and 64 anonymous users are browsing this forum.

Moderator:  LandRaider, PHIL, off-roader 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 968

Rate this thread

Jump to



4x4Wire.com | OutdoorWire | MUIRNet News | 4x4Voice | 4x4Wire on FaceBook
About 4x4Wire | Advertiser's Guide |
This site and all original materials contained herein are Copyright 1999 - 2013 by OutdoorWire, Inc. -- All Rights Reserved.
The use of this website, OutdoorWire, or any of its publications or services is subject to the terms of use agreement.
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
This publication and OutdoorWire, Inc. assume no liability for your use of the material contained within this site.
OutdoorWire, 4x4Wire, SUVWire, JeepWire, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc.


Contact 4x4Wire | Privacy statement 4x4Wire TrailTalk Forums

Powered by UBB.threads™ 6.5.5

Generated in 0.017 seconds in which 0.005 seconds were spent on a total of 11 queries. Zlib compression enabled.