Just checking to see what a few of you FI/Turbo guys did to install a fuel pump capable of FI pressure/volume. I was going to mount my FP to the rear frame rail as close to the tank as possible and replace the feed line from the tank with a high strength hose (teflon lined, etc.) to prevent collapse when the electric pump starts sucking away and then hardline the high pressure side to the engine bay. Other options you guys have done??? It'll be MPI and turbo by the time I'm done so it'll be a fairly potent pump like a Walbro 255lph and I have concerns about collapsing that feed line to the pump.
-------------------- 1989 Nevada Sand Raider 2.6 5-speed
Turbo FI with Megasquirt
This site and all original materials contained herein are Copyright 1999 - 2013 by OutdoorWire, Inc. -- All Rights Reserved.
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
This publication and OutdoorWire, Inc. assume no liability for your use of the material contained within this site.
OutdoorWire, 4x4Wire, SUVWire, JeepWire, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc.