Quote: I think I will just go with what eddy said and seal up the ends. Im not so interested in top-end as I am in torque and bottom end.
Then you need to replace the plenum. By opening the butterfly valves, which is the position they are in when no vacuum is applied, i.e., when the vac line is pulled, you are running the truck on the short/high-speed runners.
This site and all original materials contained herein are Copyright 1999 - 2013 by OutdoorWire, Inc. -- All Rights Reserved.
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
This publication and OutdoorWire, Inc. assume no liability for your use of the material contained within this site.
OutdoorWire, 4x4Wire, SUVWire, JeepWire, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc.