Sorry don't have pics-but it's simple. 1. Mark all the connections since they all are on top of intake. Loosen the bolts-there is a few hoses/fittings around the throttle body and EGR tube. Upper piece of intake and Butter fly comes off in 1 piece, Clean the crap out of everything and replace with new gaskets. better yet- there is a whole rightup on here that somebody did a few yrs ago . Even had the gaskets/parts you need and relative cost (may have changed a bit) here: http://www.4x4wire.com/mitsubishi/tech/lower_plenum/
-------------------- '90 Black Monty "1"LS,'95 Monty "2" SR , 1990 Yamaha TW 200, 2000 VW Jetta TDI!
This site and all original materials contained herein are Copyright 1999 - 2013 by OutdoorWire, Inc. -- All Rights Reserved.
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
This publication and OutdoorWire, Inc. assume no liability for your use of the material contained within this site.
OutdoorWire, 4x4Wire, SUVWire, JeepWire, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc.