Ok, so I measured the axle tube this evening and found the following (for future googler's sake): Distance between U-bolt ends around axle: 3 3/8" with about 1/8" clearance Diameter as measured using string and circumference: 3.24" which I think translates to 82mm tube if it's all metric. Anyway, 3.25" spring perches would do it if they need to be replaced. I'll take a look at the front of the perches to see if they are good enough to use. Maybe a picture later too.
This site and all original materials contained herein are Copyright 1999 - 2013 by OutdoorWire, Inc. -- All Rights Reserved.
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
This publication and OutdoorWire, Inc. assume no liability for your use of the material contained within this site.
OutdoorWire, 4x4Wire, SUVWire, JeepWire, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc.