Ok next steps taken. When rebuilding the carb I did not drill the plug to the idle mixture adjusting screw. I have tried all of the other suggestions so I figured this was the only thing I have not pulled out and cleaned. I went ahead and cleaned it. It started with out a problem and idles fine. It runs great, but when I turned it off I could not get it started. Evidently the carb cleaner I sprayed cleaning the idle mix screw hole and down the carb help it start.
All other problems are solved, it idles fine and once started continues to run. But, I still can not get it started unless I pour gas or spray carb cleaner in the carb.
It has to be something that is clogged somewhere but I have no idea where.
This site and all original materials contained herein are Copyright 1999 - 2013 by OutdoorWire, Inc. -- All Rights Reserved.
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
This publication and OutdoorWire, Inc. assume no liability for your use of the material contained within this site.
OutdoorWire, 4x4Wire, SUVWire, JeepWire, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc.