With the 2.6 rebuilt now & the balance shafts eliminated,& an E-kit installed in its place. I know from installing two of these kits before there was some vibration mostly at idle & seemed not to bad at higher speeds.I find it at higher speeds & all through the gears. I'm wondering if the motor mounts would have enything to do with transfering more VIBRATION threw if the passenger side mount would be out of alignment ,or bent ? Your input would be great [image][/image]
-------------------- "YOU CAN ONLY LEARN SO MUCH KNOWLEDGE IN A LIFETIME..BUT IMAGINATION IS WHAT MAKES THE WORLD GO AROUND"
89 POWER RAM D50 4X4 XCab 2.6L
91 Grand Prix GTP 3.4L
87 Jeep YJ Laredo 4.0L EFI
This site and all original materials contained herein are Copyright 1999 - 2013 by OutdoorWire, Inc. -- All Rights Reserved.
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
This publication and OutdoorWire, Inc. assume no liability for your use of the material contained within this site.
OutdoorWire, 4x4Wire, SUVWire, JeepWire, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc.