No one makes mounts but you can get mounts to put anything in a jeep chassis from Novak on the web. My original plan was to put a 3.9 Mopar V6 into my montero but nothing fit so I have had a nonturbo block rebuilt with turbo pistons without the oil squirters in the block. I'll be running a non jet head, the starion tbi setup from an 87 and a 52mm throttle body upgrade with ported manifolds to match. I'll be running stock boost. I will have over $3000 into the motor and turbo conversion by the time this is done. If I blow it up, I will go back to N/A and use EFI somehow.
-------------------- 83 mitsu flat bed 2.6l weber, 88 auto tranny, 2" body lift, 4.625 LSD, 235/85-16E mudders (33 x 9.50).
This site and all original materials contained herein are Copyright 1999 - 2013 by OutdoorWire, Inc. -- All Rights Reserved.
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
This publication and OutdoorWire, Inc. assume no liability for your use of the material contained within this site.
OutdoorWire, 4x4Wire, SUVWire, JeepWire, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc.