Anonymous
Unregistered
|
|
hi all. im new to this import stuff. i bought a 91 power ram 50. its made by mitsubishi. am i welcome here or does anyone know of a forum where i may find some info?
thanks for the help
sb
|
Monty
Rock Warrior
Reged: 12/13/04
Posts: 865
Loc: Mill Hall, PA
|
|
Your here dude
your truck use the same drive train as the montero
ask any ?'s you might have, and someone can help you out
--------------------
1988 Montero SWBGone 
1989 Dodge Raider SWB V6 MT Off Road Package
2005 Jeep Liberty CRD 2.8L Intercooled Turbo Diesel.
Edited by Monty (10/01/06 11:24 AM)
|
DavidG
Body Damage is Cool
Reged: 10/29/03
Posts: 1258
Loc: Atlanta, Georgia
|
|
Welcome to the 'Wire SB!
--------------------
1997 Montero SR
www.georgiaoverland.com
|
Tag
Roll Me Over
Reged: 01/30/01
Posts: 3863
Loc: Oakwood, IL
|
|
Is it a v6 , a 4x4, auto tranny? What part of the country are you from?
--------------------
89 2dr 3.0 AT, manual hubs. 33x12.5 MT
gen 2 coils,Cranked front tbars
Dons rocker protection, Front/Rear Bumpers. ARB rear locker, 2" BL, Beefed up skid plates/trailing arms. Gen II uca, 2 Bouncy seats www.youtube.com/TagGeorge
|
powerRam50
Body Damage is Cool
Reged: 01/15/03
Posts: 1726
Loc: springfield,oregon
|
|
hi there the trucks sure can be fun.i have 35's on mine.
--------------------
87 dodge power ram 50,35" tires,5 1/2" total lift,4.6 gears,lockers front and rear,Rancho RS5000's,custom front bumper,custom rock sliders,cct extended diff breathers,75 amp alt(40 amp stock),thorely header,K&N,wheeled hard...
|
Anonymous
Unregistered
|
|
thanks all! its a 91 4x4 with a 5 spd. has a 2.4l with 271000 miles, which leads to a couple more q's...
i did a compression check that went from 105 to 130#. im thinking thats kind of low, that the motor is about done. my neighbor has a mid 80's 2wd with a 2.0 motor with only 130000 miles. can i bolt the 2.0 into my truck and use the fuel injection? basically use his long block and all my accessories. what about the bellhousing? will mine bolt to the 2.0 or the 2.0 bell to my trans? i imagine ill have a bunch of questions in the near future and would appreciate the help. thanx!
sb
|
powerRam50
Body Damage is Cool
Reged: 01/15/03
Posts: 1726
Loc: springfield,oregon
|
|
most peaple here have the 2.6 or 3.0.the 2.4 and 2.0 is rare on this forum.for that queston i would ask on www.mightyd50.com they are mainly 2wd peaple but they have a ton of experiance on those 2 moters.
--------------------
87 dodge power ram 50,35" tires,5 1/2" total lift,4.6 gears,lockers front and rear,Rancho RS5000's,custom front bumper,custom rock sliders,cct extended diff breathers,75 amp alt(40 amp stock),thorely header,K&N,wheeled hard...
|
Anonymous
Unregistered
|
|
Quote:
most peaple here have the 2.6 or 3.0.the 2.4 and 2.0 is rare on this forum.for that queston i would ask on www.mightyd50.com they are mainly 2wd peaple but they have a ton of experiance on those 2 moters.
thanks
|
MontyMcV
Trail Leader
Reged: 06/04/03
Posts: 7046
Loc: Cleve-burg OH USA
|
|
Check out the Turbo Conversion Bible thread on this forum. If you're thinking about a swap...
--------------------
Big Truck 2: 00, 3.5, Endeavor, 94k, stock for now
Big Truck 1: 95, MT, >Gone<
Little Truck: 87, 2.6T I/C, MT, LSDs, Tonneau Top
Her Truck: 03, 3.8, 20th Anniv, 29k miles!
FSMs: MitsubishiLinks.com
|
fasteddy
Web Wheeler
Reged: 01/30/01
Posts: 12705
Loc: Flat Creek, GA
|
|
He's on the right track already. The 2.0/2.4 bellhousing won't bolt to the 2.6 block, which is unique I think, and he has a 5spd with a non-removable bellhousing. A 2.4 with Eclipse 2.0 turbo stuff would be real nice...
--------------------
"If you can't be a good influence, don't worry, you can still be a horrid example."
|
Previous
Index
Next
Threaded
Edit
Reply
Quote
