4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums
RUST BULLET AUTOMOTIVE
Extreme Terrain



TrailTalk Forums | 4x4Wire | 4x4Voice | OutdoorWire | MUIRNet News | 4x4Wire on: FaceBook | Google+

4x4Wire Mitsubishi Trail Talk Forums

More Mitsubishi on 4x4Wire: 4x4Wire Mitsubishi Section | Mitsubishi Tech
4x4Wire TrailTalk Mitsubishi Forums: Mitsubishi 4x4 and SUV Tech | Mitsubishi Diesels | Mitsubishi Archives


Mitsubishi Forums >> Mitsubishi 4x4 & SUV Tech

Pages: 1 | 2 | 3 | 4 | >> (show all)
Scottie2113
Body Damage is Cool


Reged: 05/18/03
Posts: 2047
Loc: Fort Huachuca, AZ
4.90 diff gears--->direct swap???? AFT or gear oil in T-case?
      #924379 - 09/22/06 07:12 PM

OK, I called M&S and they said that the 4.90 diffs from a montero sport come from the 3.0L engine version. would these diffs swap right into my gen II montero with a 3.5L engine? I need a little more info on this for sure before I buy them. I know someone out there knows for sure. I am trying to get a locking rear diff with 4.90 gears that bolts right into my 3.5L montero and a matching front diff with 4.90 gears that bolts right in as well. does anyone know the year and what size engine will allow this swap??

--------------------
97 Montero SR Mitsu Rear Diff Lock ARB Front Diff Lock 4.9 R&P 3.15 transfer 43:1 crawl ratio 2" susp lift 2" body lift 2" Gas Tank Lift 35x12.5 MTRs on 15x10 Dick Cepeks Rock Sliderz Custom rear bumper ARB front winch bumper 12,000 lbs MM Winch

Edited by Scottie2113 (09/23/06 04:34 PM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
Scottie2113
Body Damage is Cool


Reged: 05/18/03
Posts: 2047
Loc: Fort Huachuca, AZ
Re: 4.90 diff gears--->direct swap???? [Re: Scottie2113]
      #924380 - 09/22/06 07:18 PM

I am pretty sure that diffs from a 2001+ montero sport 3.0L have 4.90 gears stock, but do they swap right into a 3.5L gen II montero??? can anyone verify this?

--------------------
97 Montero SR Mitsu Rear Diff Lock ARB Front Diff Lock 4.9 R&P 3.15 transfer 43:1 crawl ratio 2" susp lift 2" body lift 2" Gas Tank Lift 35x12.5 MTRs on 15x10 Dick Cepeks Rock Sliderz Custom rear bumper ARB front winch bumper 12,000 lbs MM Winch


Post Extras: Print Post   Remind Me!   Notify Moderator  
Scottie2113
Body Damage is Cool


Reged: 05/18/03
Posts: 2047
Loc: Fort Huachuca, AZ
Re: 4.90 diff gears--->direct swap???? [Re: Scottie2113]
      #924386 - 09/22/06 07:39 PM

after doing some talking with some part yards, the diff from a sport with the 3.0L will swap over to a montero with a 3.0 but not a 3.5, is this correct? man, that a bummer if that is the case??? I am itching for an answer....

--------------------
97 Montero SR Mitsu Rear Diff Lock ARB Front Diff Lock 4.9 R&P 3.15 transfer 43:1 crawl ratio 2" susp lift 2" body lift 2" Gas Tank Lift 35x12.5 MTRs on 15x10 Dick Cepeks Rock Sliderz Custom rear bumper ARB front winch bumper 12,000 lbs MM Winch


Post Extras: Print Post   Remind Me!   Notify Moderator  
yankneck696
Mudrunner


Reged: 09/20/06
Posts: 406
Loc: Port Charlotte, FL
Re: 4.90 diff gears--->direct swap???? [Re: Scottie2113]
      #924393 - 09/22/06 08:20 PM

From Hollander exchange ( junk yard interchange computer )
444-56313
MONTERO SPORT
MONTERO 3.0L 6 cyl
This is for the Differential assembly.
Both non locking
For just the Diff, they are the only ones that the computer says will swap with no changes. No notes on the application.

--------------------
Yankneck = Yankee ingenuity with Redneck stupidity.
"How can I break it better?"
89 Raider 3.0 w/ 31's for now


Post Extras: Print Post   Remind Me!   Notify Moderator  
LandRaiderModerator
Forum Moderator


Reged: 09/04/01
Posts: 8553
Loc: Ocean Springs, MS
Re: 4.90 diff gears--->direct swap???? [Re: yankneck696]
      #924394 - 09/22/06 08:22 PM

Possibly a driveshaft change required?

I bet they say a 99 MS axle wont fit into a 83 montero either, but it will.

I dont think the centersections will swap, but the whole housings will. ?? dont know for sure though.

--------------------
87 Raider 4D56td v5MT1
31's..Basically Stock


Post Extras: Print Post   Remind Me!   Notify Moderator  
Scottie2113
Body Damage is Cool


Reged: 05/18/03
Posts: 2047
Loc: Fort Huachuca, AZ
Re: 4.90 diff gears--->direct swap???? [Re: yankneck696]
      #924398 - 09/22/06 08:42 PM

I want to make sure I am understanding your post correctly:

are you saying that a diff from a montero sport 3.0L will swap directly into a montero with a 3.0L? what I am trying to find out is if a 4.90 diff from a 3.0L sport will bolt directly into the axle housing of a 3.5L montero. I know that the 3.5L monteros have 12 bolt carrier patterns. I need to find out if the sport 4.90 diff has 10 bolts or 12, that should answer my question, does anyone have a sport with a 3.0L and 4.90 diffs that can count how many bolts go around the carrier???

--------------------
97 Montero SR Mitsu Rear Diff Lock ARB Front Diff Lock 4.9 R&P 3.15 transfer 43:1 crawl ratio 2" susp lift 2" body lift 2" Gas Tank Lift 35x12.5 MTRs on 15x10 Dick Cepeks Rock Sliderz Custom rear bumper ARB front winch bumper 12,000 lbs MM Winch


Post Extras: Print Post   Remind Me!   Notify Moderator  
sparkem
Trail Leader


Reged: 12/12/00
Posts: 6888
Loc: Ponchatoula, LA
Re: 4.90 diff gears--->direct swap???? [Re: Scottie2113]
      #924399 - 09/22/06 08:46 PM

I have a 93SR with 4.90s, I will count tomorrow for you. I dont know if it is the same as the sport though.

--------------------
I just want to tell you both good luck, and we're all counting on you.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Scottie2113
Body Damage is Cool


Reged: 05/18/03
Posts: 2047
Loc: Fort Huachuca, AZ
Re: 4.90 diff gears--->direct swap???? [Re: sparkem]
      #924401 - 09/22/06 08:55 PM

does yours have the 3.0L engine?

--------------------
97 Montero SR Mitsu Rear Diff Lock ARB Front Diff Lock 4.9 R&P 3.15 transfer 43:1 crawl ratio 2" susp lift 2" body lift 2" Gas Tank Lift 35x12.5 MTRs on 15x10 Dick Cepeks Rock Sliderz Custom rear bumper ARB front winch bumper 12,000 lbs MM Winch


Post Extras: Print Post   Remind Me!   Notify Moderator  
yankneck696
Mudrunner


Reged: 09/20/06
Posts: 406
Loc: Port Charlotte, FL
Re: 4.90 diff gears--->direct swap???? [Re: Scottie2113]
      #924406 - 09/22/06 09:12 PM

Quote:

I want to make sure I am understanding your post correctly:

are you saying that a diff from a montero sport 3.0L will swap directly into a montero with a 3.0L? what I am trying to find out is if a 4.90 diff from a 3.0L sport will bolt directly into the axle housing of a 3.5L montero. I know that the 3.5L monteros have 12 bolt carrier patterns. I need to find out if the sport 4.90 diff has 10 bolts or 12, that should answer my question, does anyone have a sport with a 3.0L and 4.90 diffs that can count how many bolts go around the carrier???




I am saying exactly that. I only find it happening in the non locking setup. ANY 97 Montero Sport non locking will fit in 96-97 Montero 3.0L. I cannot find the ratio.
Now, this is not to say others will fit. This is what the interchange computer lists.

Ed

--------------------
Yankneck = Yankee ingenuity with Redneck stupidity.
"How can I break it better?"
89 Raider 3.0 w/ 31's for now


Post Extras: Print Post   Remind Me!   Notify Moderator  
Scottie2113
Body Damage is Cool


Reged: 05/18/03
Posts: 2047
Loc: Fort Huachuca, AZ
Re: 4.90 diff gears--->direct swap???? [Re: yankneck696]
      #924408 - 09/22/06 09:20 PM

yeah, i am having the feeling that the 4.90 diffs only swap into 3.0L monteros and montero sports. I do not think they are going swap into a 3.5L montero. looks like I may have to use 4.6 diffs from a 94-96 3.5L montero like I just put in my 97 LS. Along with the 3.15 t case gears that should be plenty enough to spin 35's. I was hoping for 4.90's direct swap, but 4.6 will be plenty enough. But I think there was a guy out there that knew for sure, I am not going to count the 4.90's out until this post is up for a while and hopefully someone will know for sure. I am pretty sure there were two bolt patterns 10 bolt and 12 bolt. the 12 bolt pattern was used on the 3.5 engines and the 10 bolts were on the 3.0 it seems.

scottie

--------------------
97 Montero SR Mitsu Rear Diff Lock ARB Front Diff Lock 4.9 R&P 3.15 transfer 43:1 crawl ratio 2" susp lift 2" body lift 2" Gas Tank Lift 35x12.5 MTRs on 15x10 Dick Cepeks Rock Sliderz Custom rear bumper ARB front winch bumper 12,000 lbs MM Winch


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1 | 2 | 3 | 4 | >> (show all)



Extra information
5 registered and 36 anonymous users are browsing this forum.

Moderator:  LandRaider, PHIL, off-roader 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 2697

Rate this topic

Jump to




4x4Wire.com | OutdoorWire | MUIRNet News | 4x4Voice | 4x4Wire on FaceBook
About 4x4Wire | Advertiser's Guide |
This site and all original materials contained herein are Copyright 1999 - 2013 by OutdoorWire, Inc. -- All Rights Reserved.
The use of this website, OutdoorWire, or any of its publications or services is subject to the terms of use agreement.
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
This publication and OutdoorWire, Inc. assume no liability for your use of the material contained within this site.
OutdoorWire, 4x4Wire, SUVWire, JeepWire, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc.


Contact 4x4Wire | Privacy statement 4x4Wire TrailTalk Forums

Powered by UBB.threads™ 6.5.5

Generated in 0.014 seconds in which 0.002 seconds were spent on a total of 13 queries. Zlib compression enabled.