I think the passenger side fails as that is the side that resists most of the drive train torque when going forward. Usually helps to wrap a chain around the mounts to keep them from pulling apart and then they'll last a very long time as you never stretch the rubber too far: - http://www.4crawler.com/4x4/CheapTricks/MotorMount.shtml
And yes, I know there are ground wires disconnected and hoses missing. I took that photo while I was rebuilding the engine about 12 years ago.
This site and all original materials contained herein are Copyright 1999 - 2013 by OutdoorWire, Inc. -- All Rights Reserved.
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
This publication and OutdoorWire, Inc. assume no liability for your use of the material contained within this site.
OutdoorWire, 4x4Wire, SUVWire, JeepWire, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc.