drcoffee
(Need a Spot)
06/18/12 08:43 AM
Re: 2000 Tundra 4x4 Rear Axle Seal Replacement - Brakes Saturated

The re-birth of an old thread. But someone may find this in a search like I did.

This link may be helpful.

possible-solution-leaking-axle-seals

* a zip strip around the brake cylinder will keep the pistons in place. Consider new cylinder now while you have everything apart. Aisin parts are only $20 ea at rockauto.





4x4Wire.com | OutdoorWire | MUIRNet News | 4x4Voice | 4x4Wire on FaceBook
About 4x4Wire | Advertiser's Guide |
This site and all original materials contained herein are Copyright 1999 - 2013 by OutdoorWire, Inc. -- All Rights Reserved.
The use of this website, OutdoorWire, or any of its publications or services is subject to the terms of use agreement.
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
This publication and OutdoorWire, Inc. assume no liability for your use of the material contained within this site.
OutdoorWire, 4x4Wire, SUVWire, JeepWire, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc.


Contact 4x4Wire | Privacy statement 4x4Wire TrailTalk Forums

Powered by UBB.threads™ 6.5.5

Generated in 0.003 seconds in which 0.001 seconds were spent on a total of 4 queries. Zlib compression enabled.