allochris
(Rock Warrior)
09/13/06 02:42 AM
Re: LSD swap from supra

No 4cyl/2pinions carrier. Only v6/4 pinion carrier works because you need to save one side of the FAT v6 truck bearing (including outer- race) to press onto one side of your supra LSD. I regret that I did not shim the springs for the friction plates inside the LSD & I totally recommened you to do so. Don't forget to add a bottle of LSD additive into your gear oil. I got mine for $4 from Ford dealership.




4x4Wire.com | OutdoorWire | MUIRNet News | 4x4Voice | 4x4Wire on FaceBook
About 4x4Wire | Advertiser's Guide |
This site and all original materials contained herein are Copyright 1999 - 2013 by OutdoorWire, Inc. -- All Rights Reserved.
The use of this website, OutdoorWire, or any of its publications or services is subject to the terms of use agreement.
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
This publication and OutdoorWire, Inc. assume no liability for your use of the material contained within this site.
OutdoorWire, 4x4Wire, SUVWire, JeepWire, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc.


Contact 4x4Wire | Privacy statement 4x4Wire TrailTalk Forums

Powered by UBB.threads™ 6.5.5

Generated in 0.004 seconds in which 0.001 seconds were spent on a total of 4 queries. Zlib compression enabled.