Cochip
(Getting the Wheeling Fever)
11/29/10 12:43 PM
Re: 7MGE Swap

So I got a fair amount done since the last posting. I'd be much further along, but there are no more days off of work to take, so I'm getting stuff done when time allows. A fair amount of this swap is now the "little" things, like a throttle cable, heater hoses and relocating the power steering pump resivior. One of the things I'm stuck on right now is splicing in the 7mge alternator plug to the 22RE harness. They're both three wire connections, but I'm not sure what wire does what. So here I am tapping into your wealth of knowledge. Any idea?


22re plug pictured from above.


22re plug pictured from behind



7mge plug from behind

Thanks for your help.





4x4Wire.com | OutdoorWire | MUIRNet News | 4x4Voice | 4x4Wire on FaceBook
About 4x4Wire | Advertiser's Guide |
This site and all original materials contained herein are Copyright 1999 - 2013 by OutdoorWire, Inc. -- All Rights Reserved.
The use of this website, OutdoorWire, or any of its publications or services is subject to the terms of use agreement.
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
This publication and OutdoorWire, Inc. assume no liability for your use of the material contained within this site.
OutdoorWire, 4x4Wire, SUVWire, JeepWire, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc.


Contact 4x4Wire | Privacy statement 4x4Wire TrailTalk Forums

Powered by UBB.threads™ 6.5.5

Generated in 0.004 seconds in which 0.001 seconds were spent on a total of 4 queries. Zlib compression enabled.