CJM
(Body Damage is Cool)
03/12/10 09:24 PM
Re: sold the first one .. so this ones mine ... Trekker Build

started working on the doors and inner trim panels .. got the inner of the doors cleaned up , and just about ready to prime .. also started on the trim panel

started with a flat sheet of fiberglass



marked it and trimed it to fit
I was going to have it 2 seperate pieces , like the stock panel , but my "mid speakers are to big :) ... there is a small "step" in the door panel anyway .. so cutting it and re glassing it will achieve a perfect fit with NO rattles .



starting the "mock up" for speaker location :)




.





4x4Wire.com | OutdoorWire | MUIRNet News | 4x4Voice | 4x4Wire on FaceBook
About 4x4Wire | Advertiser's Guide |
This site and all original materials contained herein are Copyright 1999 - 2013 by OutdoorWire, Inc. -- All Rights Reserved.
The use of this website, OutdoorWire, or any of its publications or services is subject to the terms of use agreement.
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
This publication and OutdoorWire, Inc. assume no liability for your use of the material contained within this site.
OutdoorWire, 4x4Wire, SUVWire, JeepWire, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc.


Contact 4x4Wire | Privacy statement 4x4Wire TrailTalk Forums

Powered by UBB.threads™ 6.5.5

Generated in 0.004 seconds in which 0.001 seconds were spent on a total of 4 queries. Zlib compression enabled.