| gueroblanco |
| (Wheeler) |
| 09/14/09 01:55 AM |
|
Re: weber 32/36 electric choke wiring
|
I made a very technical wiring harness
and then hooked it up...
In addition I found that I still needed to plug a couple vaccuum ports coming off the intake and i had a vent hose and the fuel supply line crossed. (
that can't be good) had fuel coming out the other vent line that's supposed to go to the first charcoal canister. that tripped me out... anyway, she fired right up and was running very smooth. It's been a long strange road to get to this point, I'll tell you all the whole story in another section of the wire someday, but the engine change out and the offy intake / weber might not have been the best idea to do all at once, but whatev. I'm coming around the final turn now. I think I have the vac advance hoses figured out for the distributor, and if I do, I will show where they go so that others may have a look. thanks guys.