Please update your Flash Player to view content.

4x4Wire is for you, your 4x4 and access issues that interest four-wheelers
You, your 4x4, access issues, places to go and more outdoor topics

Ongoing discussion of recreational and environmental issues for four-wheelers
Ongoing discussion of recreation and environmental issues affecting California

Environmental news and information for recreation advocates
Environmental news and information for recreation advocates

Discussion forums covering a variety of 4x4 model technical issues and general recreation topics
Discussion forums covering 4x4 technical issues and general recreation topics


Search 4x4Wire for more on OHV recreation and 4x4 Tech

4x4Wire

News and information about you and your 4x4

Wheeling into 2011 with Rugged Rocks





Search 4x4Wire for more on OHV recreation and 4x4 Tech




We're now just a stones throw away from some of the greatest wheeling in the country which includes but isn't limited to the famous Rubicon Trail. Not only does this give us a place to play, but a great area to test new products.

Speaking of testing products, we're looking to putting together a small team of people we'll be referring to as the 'Rugged Rocks Rough Riders' which would consist of people that are extremely active in this Nissan off-road community who wheel often and attend big events such GONE Moab, or even more preferably, compete in 4x4 events. These individual vehicles would help test prototype products, receiving them at little to no cost and would be able to purchase other production Rugged Rocks product at discounted rates. Stickers and other promotional items will be given to the team to champion the growth of Rugged Rocks at events and trail runs.

We're more immediately looking to test product on the following vehicles:

'87 - '95 Pathfinder

'86 - '97 Hardbody

'98 - '04 Xterra or Frontier

For further details on becoming part of the Rugged Rocks Rough Riders, please e-mail This email address is being protected from spambots. You need JavaScript enabled to view it. with your name, address and full details of your vehicle along with a few pictures.

Throughout 2010, we've become knee deep in various projects. In 2011 we plan on wrapping up the majority of the things that we started last year. Here is a quick list of whats on the board and where we are with each product or project.

Pathfinder/Hardbody 3.0L HD motor mounts available on the shelf, ready to ship.
Xterra / Frontier 3.3L HD Motor mounts recently redesigned and should be complete in the next 8 weeks or so.
WD21 Pathfinder Long Arm 4-Link First production brackets and truss are complete, needs final testing
H233B/D60 Front Diamond Axle first axle is near completion, Configuring the brakes to use factory nissan calipers to maintain pedal pressure for proper braking.

Inner axle shafts need to be cut and splined

Pathfinder / Hardbody SAS Kit Will be using a H233B/D60 Diamond front axle. The timeframe for completion is dependent on when the front axle is complete.
H233B 31 & 33 spline H233B Chromoly Shafts Still on the list for being made. Ideally these would be ready by May 2011, but currently we don't have a firm ETA.
H233B 3-link brackets Will be on the shelf ready to ship 1/06/2011
H233B Carrier Adjuster Tools available on on the shelf, ready to ship.
Rugged Rocks Winch Fairleads available and on the shelf, ready to ship.
TX-10 transfercase doubler Due to the order minimum with the manufacture, and extended wait times, this project is currently stalled.
Xterra / Frontier 3.3L V6 Doug Thorley Headers (SC and non-SC) Currently out of stock but expected in by the end of Jan 2011.
H233B 5.42 Ring and Pinion gears Canceled. can't justify engineering and cutting a min of 100 sets. Rugged Rocks is aiming to use the H233B front and rear for SAS'd vehicles, so compatibility with other axles isn't a concern. 5.571 and 5.857 ratios are available.
pre-'05 Xterra / Frontier / Pathfinder - H233B 33-Spl Lockright Locker Design is done and prototypes are next in line to be made. Aiming for an ETA of Mid April for Production Units.
Xterra / Frontier '05+ C200K Lockright Locker Currently in the prototype stage, production units expected in early March.
Advanced Adapters - 4 Cyl Pathfinder / Hardbody Atlas Adapter working with AA to get this done, no ETA.
TJM H233B (31 & 33 spline) Air Lockers Expected in stock by Mid February.
ARB (M205) Titan Front Air Locker on the list for production in Australia but currently there is no ETA
Superior M205 4.10 & 4.56 Gears Due in Any Day

If you have any questions or would like to simply express interest in a new product, please e-mail Steven Lutz at This email address is being protected from spambots. You need JavaScript enabled to view it.

Thank you for your continued support of Rugged Rocks, we're really looking forward to completing projects we started as well as continue to work with other manufactures to grow the Rugged Rocks product line and Nissan 4x4 aftermarket support as a whole.

 

BRC Commends 112th Congress for Addressing TMR Rel...
Teams Partner for Land Use for Griffin King of the...
 

Comments

No comments made yet. Be the first to submit a comment

4x4Wire Posts List