Recreation Advocate
REVTEK SUSPENSION INTRODUCES 2.5-INCH LIFT SYSTEM FOR ’08 TOYOTA SEQUOIA
REVTEK SUSPENSION INTRODUCES 2.5-INCH LIFT SYSTEM FOR ’08 TOYOTA SEQUOIA
Revtek Suspension is proud to announce the introduction of its brand new 2.5-inch lift system for the ‘08 Toyota Sequoia full size SUV, two and four wheel drive models. Based on Revtek’s proven Split/Spacer design, this new system incorporates billet aluminum front spacers, steel differential drop spacers, rugged polyurethane rear coil spacers, and all necessary hardware. Designed to work with the stock suspension geometry, this new system does not require new shock absorbers and allows the fitment of up to 35 x 12.5-inch tires. Easy bolt-in installation with no drilling, cutting or welding required. Not compatible with optional air suspension. Revtek Suspension, 877 LIFT TOY; www.revtek.com
###
Based in Portland Oregon, Revtek Suspension prides itself in producing “real world” engineered suspension systems and components for Dodge, Ford, GM Jeep, Nissan and Toyota trucks/SUV’s. Revtek systems are designed and tested in-house, resulting in the most installer-friendly, best-riding kits on the market.
About the author
4x4Wire News-Bytes
4x4Voice News
MUIRNet News
Trending on Outdoorwire
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting. Copyright (c) 1999-2020 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission. You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material. All corporate trademarks are the property of their respective owners.