OR-Fab Rocker Panel Rails For 2013 Model Jeep JK Wranglers

Chino Valley, AZ - OR-Fab’s Rocker Panel Rails protect the underside and the outer sheet-metal from damage when driving your Jeep Wrangler on the trail. These rocker panel rails are easy to install and feature a .120-wall steel tube rock-slider bar to provide superior protection. The precision laser-cut design makes for a flush fit against the vehicle’s rockers, and keeps the rock slider rail tucked close to the body, so you won’t bang your ankles when entering or exiting your Jeep.

Available for two-door models (PN-84207) and four-door Unlimited models (PN-84307), OR-Fab’s Rocker Panel Rails fit Jeep JK’s from ’07 to 2013, and are available in either a black gloss black or matte wrinkle finish. For more information, contact OR-Fab, P.O. Box 3450, Chino Valley, AZ 86323. 928-636-7080. Or visit them on the web at www.ORFab.com.

Corporate Contact:
Steve Rezek
OR-Fab, P.O. Box 3450, Chino Valley, AZ 86323 - 928 636-7080

  • Hits: 7287

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting. Copyright (c) 1999-2020 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission. You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material. All corporate trademarks are the property of their respective owners.